Thursday, October 18, 2012
How To Pair Most Jawbone Bluetooth Headsets
I recently got a Jawbone headset for a dollar complete with proprietary USB charger and wall/USB AC adapter.
To pair a Jawbone bluetooth headset with your phone …
1) Make sure bluetooth is turned on on your cellphone, phone, or computer that you are pairing the device too.
2) Turn the Jawbone device off. Hold the outer shell until the white light stops blinking.
3) Press & hold the Jawbone’s hidden "Noise Shield" button (the black end that connects to the charger, right under the word Jawbone) for 3 seconds until the LED status indicator alternately flashes white then red.
4) Type the pairing "0000" (four zeros) when your device prompts you for such ~ pairing mode will last for 2 minutes, or until pairing is complete.
Other information …
If your headset is older … it may seem like it won't "turn on" usually it just needs resetting.
Gently pry the top "design molded" piece upward with your fingernail or use a small plastic scraper. Be careful not to damage the tabs. Hold the center button down for 15 seconds.
Replace the top "designer molded" plastic piece.